GE Simon 60-875 - Option 53: Hardwire Siren Supervision; Option 54: Access Code Length

Simon Security System 43
Option 53: Hardwire Siren Supervision
(Default = off)
Determines whether the panel monitors hardwired
sirens for open conditions (on), or not (off).
If this option is turned on, sirens connected to the
panel terminals require an EOL resistor in the wire cir-
cuit (see “Installing the System” for siren wiring). If
this option is turned off, EOL resistors are not required
whether sirens are connected or not.
Note
For UL listed systems, this feature must be on and EOL
resistors installed. Also for UL Listed systems, this feature
must be on if Option 29: Panel Piezo Alarms is off.
¾To turn on Hardwire Siren Supervision, press:
1. Add
2. Option #
3. 53
4. DONE
¾
To turn off Hardwire Siren Supervision, press:
1. Delete
2. Option #
3. 53
4. DONE
Option 54: Access Code Length
(Default = 4)
Determines how many digits are in all access codes.
Turning on this option lets you set the access code
length to 3, 4, 5, or 6 digits. Turning off this option
resets the access code length to the default setting,
resets Master, Utility 1, and Utility access codes.
Read the following before changing this option.
• This option affects all system access codes (Mas-
ter, Utility 1, Utility 2, Panic, and User).
• Changing the access code length changes the
Master, Utility 1, and Utility 2 access codes to
their respective defaults as described in the table
below.
Note
Changing the Access Code Length clears/deletes any
User Codes that were previously programmed. If the cus-
tomer wants the Access Code Length changed, it should
be set before programming any new (unprogrammed)
access codes, whenever possible.
¾To change Access Code Length, press:
1. Add
2. Option #
3. 54
4. Use the numbered keys to enter 3, 4, 5 or 6.
5. DONE
¾
To reset Access Code Length (to default), press:
1. Delete
2. Option #
3. 54
4. DONE
Access Code Length Defaults
Setting Default Code
3 Master—123
Utility 1—321
Utility 2—321
4 Master—1234
Utility 1—4321
Utility 2—4321
5 Master—12345
Utility 1—54321
Utility 2—54321
6 Master—123456
Utility 1—654321
Utility 2—654321