GE Simon 60-875 - Option 64: no Arm on Panel Low Battery; Option 65: no Usage Report; Option 66: External Siren Delay

Simon Security System 47
Option 64: No Arm on Panel Low Battery
(Default = off)
Determines whether the system prevents users from
arming if a low CPU battery condition exists (on) or
not (off).
¾
To turn on No Arm on Panel Low Battery, press:
1. Add
2. Option #
3. 64
4. DONE
¾
To turn off No Arm on Panel Low Battery, press:
1. Delete
2. Option #
3. 64
4. DONE
Option 65: No Usage Report
(Default = off)
Determines whether the panel sends a No Usage
report to the central station if the user has not operated
the system before the programmed time expires (on)
or not (off). The timer starts each time the system is
disarmed.
This is a customer service feature that alerts the cen-
tral station if a customer is not using their security
system. The service provider can then contact the cus-
tomer to find out why the system is not being used,
and help correct any problems for the customer.
The time can be set from 001 to 254 days. Entries
must be 3 digits.
¾
To turn on No Usage Report, press:
1. Add
2. Option #
3. 65
4. Use the numbered keys to enter 001 - 254 days (entries
must be 3 digits).
5. DONE
¾
To turn off No Usage Report, press:
1. Delete
2. Option #
3. 65
4. DONE
Option 66: External Siren Delay
(Default = off)
Determines whether external siren activation is
delayed 30 seconds after an alarm caused by a
delayed sensor (on), or if external siren activation is
immediate upon alarm activation (off).
¾
To turn on External Siren Delay, press:
1. Add
2. Option #
3. 66
4. DONE
¾
To turn off External Siren Delay, press:
1. Delete
2. Option #
3. 66
4. DONE