GE Simon 60-875 - Option 58: Remote Touchpad Arming; Option 59: Exit Extension; Option 60: Secure Arming

Simon Security System 45
Option 58: Remote Touchpad Arming
(Default = off)
Determines whether keychain and remote touchpads can disarm the sys-
tem only during exit and entry delays (on), or arm and disarm the system
anytime (off).
¾
To turn on Remote Touchpad
Arming, press:
1. Add
2. Option #
3. 58
4. DONE
¾
To turn off Remote Touchpad
Arming, press:
1. Delete
2. Option #
3. 58
4. DONE
If this option and Option 28 (No Delay from Keychain Touchpad)
are on, users cannot enter and/or disarm using remote touchpads
without causing an alarm.
Caution
!
Option 59: Exit Extension
(Default = on)
Determines whether the panel restarts the exit delay time if the user
enters the armed premises during the initial exit delay period (on), or not
(off).
Turning on this feature allows users to re-enter during the exit delay
period, without disarming and then re-arming the system. Turning off
this feature requires the user to disarm and re-arm the system.
Note
Option 38 must be ON for exit extension to work.
For UL listed systems, Exit Extension must be off.
¾To turn on Exit Extension, press:
1. Add
2. Option #
3. 59
4. DONE
¾
To turn off Exit Extension, press:
1. Delete
2. Option #
3. 59
4. DONE
Option 60: Secure Arming
(Default = off)
Determines whether an access code is required when arming the system
(on) or not (off).
This option does not affect keychain touchpad arm/disarm operation.
¾
To turn on Secure Arming, press:
1. Add
2. Option #
3. 60
4. DONE
¾
To turn off Secure Arming, press:
1. Delete
2. Option #
3. 60
4. DONE