EasyManua.ls Logo

GE Simon 60-875 - Option 25: CPU Low Battery Report; Option 26: Fail to Communicate; Option 27: Ring;Hang;Ring

GE Simon 60-875
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Simon Security System
32
Option 25: CPU Low Battery Report
(Default = on)
Determines whether the panel sends a low CPU battery
report to the central station when the panel backup battery
voltage drops below 5.4 volts (on), or not (off).
Note
For UL listed systems, CPU Low Battery Report must be on.
¾To turn on CPU Low Battery Report, press:
1. Add
2. Option #
3. 25
4. DONE
¾
To turn off CPU Low Battery Report, press:
1. Delete
2. Option #
3. 25
4. DONE
Option 26: Fail to Communicate
(Default = on)
Determines whether the panel and interior sirens sound trou-
ble beeps if it is unable to successfully send a report to a cen-
tral station or pager (on), or not (off).
Note
For UL listed systems, Fail to Communicate must be on.
¾To turn on Fail to Communicate, press:
1. Add
2. Option #
3. 26
4. DONE
¾
To turn off Fail to Communicate, press:
1. Delete
2. Option #
3. 26
4. DONE
Option 27: Ring/Hang/Ring
(Default = 1)
Determines when the panel answers a remote phone access
or Toolbox call. Depending on whether an answering
machine exists at the panel location, off-site access to the
panel can be done with a series of phone calls or just one.
For off-site access where an answering machine does not
exist, the user or ToolBox operator simply calls the panel
location once and listens for 10 rings. The panel should
answer after the tenth ring.
For off-site access where an answering machine exists, the
user or ToolBox operator must perform the following steps:
1. Call the panel location.
2. Let the phone ring once, then hang up.
3. Wait at least 10 seconds but not more than 40, then call
the panel location again. The panel should answer on the
first ring.
If set to 1 or 5, perform steps 1 - 3 once.
If set to 2 or 6, perform steps 1 - 3 twice.
If set to 3 or 7, perform steps 1 - 3 three times.
The table below shows the available settings.
¾
To turn on Ring/Hang/Ring, press:
1. Add
2. Option #
3. 27
4. Use the numbered keys to enter 1 - 7 (see table
below).
5. DONE
¾
To turn off Ring/Hang/Ring (disable remote
access), press:
1. Delete
2. Option #
3. 27
4. DONE

Table of Contents

Other manuals for GE Simon 60-875

Related product manuals