Simon Security System
26
Option 08: Phone Lock
(Default = off)
Prevents resetting of phone/reporting related Options 04, 05,
06, 07, 08, 09, 12, 13, 54, 56 and Utility Code 1 when a
memory clear is performed (on), or resets these options to
their default values when a memory clear is performed (off).
¾
To turn on Phone Lock, press:
1. Add
2. Option #
3. 08
4. DONE
¾
To turn off Phone Lock, press:
1. Delete
2. Option #
3. 08
4. DONE
Option 09: Downloader Code
(Default = 12345)
Lets you set a unique 5-digit code that is required for initiat-
ing ToolBox sessions (on) or sets the code to its default (off).
The code must be 5 digits long and can range from 00000 to
99999. The Downloader Code must match the downloader
access code in the ToolBox account to perform ToolBox ses-
sions.
Note
The downloader code should always be changed from the default
setting to avoid competitor theft.
¾ To set Downloader Code, press:
1. Add
2. Option #
3. 09
4. Use the numbered keys to enter the downloader
code (5 digits).
5. DONE
¾
To delete Downloader Code, press:
1. Delete
2. Option #
3. 09
4. DONE
Option 10: Entry Delay
(Default = 030 sec.)
Determines how much time the user has to disarm the system
after entering the armed premises through a designated delay
door, before an alarm occurs. Beeps sound during the entire
delay time to remind the user to disarm the system.
When turned on, the Entry Delay can be set from 005-254
seconds (030-254 if SIA Limits Option 69 is on). All entries
must be 3 digits. When turned off, the Entry Delay is set to
005 seconds.
Note
For UL listed systems, the entry delay must not exceed 45 sec-
onds.
¾ To set Entry Delay, press:
1. Add
2. Option #
3. 10
4. Use the numbered keys to enter the 3-digit delay
time.
5. DONE
¾
To turn off Entry Delay, press:
1. Delete
2. Option #
3. 10
4. DONE
To Next Page
Loading...
