GE Simon 60-875 - Option 22: Closing Reports; Option 23: Force Armed Report; Option 24: AC Power Failure Report

Simon Security System 31
Option 22: Closing Reports
(Default = off)
Determines whether the panel sends closing reports to a cen-
tral station or pager whenever the system is armed (on), or
not (off).
¾
To turn on Closing Reports, press:
1. Add
2. Option #
3. 22
4. DONE
¾
To turn off Closing Reports, press:
1. Delete
2. Option #
3. 22
4. DONE
Option 23: Force Armed Report
(Default = off)
Determines whether the panel sends a force armed report to a
central station or pager if the user bypasses protesting sen-
sors (indirect bypass) when arming the system (on), or not
(off).
¾
To turn on Force Armed Report, press:
1. Add
2. Option #
3. 23
4. DONE
¾
To turn off Force Armed Report, press:
1. Delete
2. Option #
3. 23
4. DONE
Option 24: AC Power Failure Report
(Default = off)
Determines whether the panel sends AC power failure
reports to a central station or pager after the programmed
time expires (on), or not (off).
When the panel is without AC power for 30 seconds, the
panel LEDs turn off. When the panel is without AC power
for the programmed time, an AC power failure is reported.
The panel reports an AC power restoral when AC power
returns to the panel.
The time can be set from 005-254 minutes. Entries must be 3
digits.
Note
For UL listed systems, AC Power Failure must be set to 15 min-
utes.
¾To turn on AC Power Failure Report, press:
1. Add
2. Option #
3. 24
4. Use the numbered keys to enter the time 005 -
254 minutes (all entries must be 3 digits).
5. DONE
¾
To turn off AC Power Failure Report, press:
1. Delete
2. Option #
3. 24
4. DONE