GE Simon 60-875 - System Access Codes; Option Settings; Utility Access Code 1; Master Code

Simon Security System 73
System Access Codes
The factory default settings are 4-digit access codes, but the default codes will change whenever
Option 54 (Access Code Length) is reset. The default for each access code length is listed.
Option Settings
Home Control Planning Table
Module Activated by Time Activated
Unit # Type Location Sensor Entry/Exit Start Time Stop Time
Example Lamp Hall lamp Motion Yes 8 p.m. 10:30 p.m.
1
2
3
4
5
6
7
8
System Access Codes
Type Default Installer Settings
Utility Access Code 1 654321, 54321, 4321, or 321
Utility Access Code 2 654321, 54321, 4321, or 321
Master Access Code 123456, 12345, 1234, or 123
Access Code 1 None
Access Code 2 None
Access Code 3 None
Access Code 4 None
Access Code 5 None
Panic Code None
Opt. #
Function Default Delete Range Who Can
Change:
Installer
Settings
01 Panel Piezo Beeps (must be on for UL listed
systems)
On Off On/Off U1 U2 M
02 Panel Voice On Off On/Off U1 U2 M
03 Latchkey Option Off Off 12:00 Midnight -
11:59 PM
U1 U2 M
04 Primary Phone Number Off Off 26 digits U1
05 Secondary Phone Number Off Off 26 digits U1