GE Simon 60-875 - Option 28: no Delay from Keychain Touchpad; Option 29: Panel Piezo Alarms

Simon Security System 33
Ring/Hang/Ring Settings
Setting Control Panel answers after:
1 ring/hang/ring or 10 rings
2 ring/hang/ring/hang/ring or 10 rings
3 ring/hang/ring/hang/ring/hang/ring or 10 rings
4 10 rings
5 ring/hang/ring
6 ring/hang/ring/hang/ring
7 ring/hang/ring/hang/ring/hang/ring
Off Disabled—no remote (off-site) access
Option 28: No Delay from Keychain Touchpad
(Default = off)
Determines whether a keychain touchpad arms the system
with no delay (on) or not (off).
Note
When this feature is on, the system must be disarmed before
entering the premises, since it is disabling the Entry Delay. If
Option 58: Remote Touchpad Arming is on, keychain touchpads
cannot disarm the system and will cause an alarm upon entering.
¾To turn on No Delay from Keychain Touch-
pad, press:
1. Add
2. Option #
3. 28
4. DONE
¾
To turn off No Delay from Keychain Touch-
pad, press:
1. Delete
2. Option #
3. 28
4. DONE
Option 29: Panel Piezo Alarms
(Default = on)
Determines whether the panel piezo emits alarm sounds (on)
or not (off).
Note
For UL listed systems where this option is off, at least one UL
listed external audible signal device must be used and Option 53:
Hardwire Siren Supervision must be on.
¾To turn on Panel Piezo Alarms, press:
1. Add
2. Option #
3. 29
4. DONE
¾
To turn off Panel Piezo Alarms, press:
1. Delete
2. Option #
3. 29
4. DONE