page | 111
Basic Operation
Menu System
14. Use the numeric keypad to enter the desired subnet mask address.
If a one or more digits in the address is less then three digits in length, then preceding
zeros must be used to pad the value. For example, if one of the numbers is 10, then
you would enter 010 on the keypad. If the number is 5, then you would enter 005.
The cursor will automatically advance to the next digit in the subnet mask. If an error
is made, use the ◄ or ► to move backward or forward between each digit.
15. Press the OK button to save the change. For this example, we will leave the subnet
mask set to 255.255.255.0.
16. Press the ▲ or ▼ buttons to select the Gateway setting. The gateway address
will be displayed.
17. Press the OK button to change the setting. The rst digit of the gateway address
will ash.
subnet mask:
255.255.255.0
gateway:
192.168.1.1
gateway:
_92.168.001.001
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
OR
subnet mask:
255.2_5.0.000
To Next Page
Loading...
Need help?
General