page | 80
b. Use the << or >> soft buttons on the front panel or the ◄ or ► buttons
on the IR remote control to select the desired input. Each input will
be listed by description, as shown in the example below.
c. Press the SEL button on the front panel or the OK button on the IR
remote control to select the currently displayed source.
d. The output screen will be displayed.
lg blu-ray
(( back sel ))
Basic Operation
Menu System
OR
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
lg blu-ray
(( back sel ))
enter output id
BROWSE
Basic Operation
To Next Page
Loading...
Need help?
General