page | 86
enter output id
3 BROWSE
7. Select the desired output within the group. There are two methods:
► Select by Output Channel
a. Use the numbers on the keypad to enter the number. If you make a
mistake, press the Clear button to erase the entry.
b. Press the OK button to accept the selection.
► Browse by Output
• Press the BROWSE button on the front panel and select the output
from a list.
Basic Operation
Menu System
OR
LAN
POE
5V DC
1 2
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
LAN
POE
5V DC
1 2
Matrix Controller
Status
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
enter output channel
browse
Basic Operation
To Next Page
Loading...
