Installation & Service Manual
87
System Cabling for Kayenne Control Panels
System Cabling for Kayenne Control Panels
USB, Ethernet, and custom multi-pin cabling is used to connect the Kayenne Video
Processing Frame, Panel Control Unit (PCU), Control Panel, and Menu Panel components.
In addition to the Video Processing Frame, the PCU also includes a built-in Ethernet Switch.
Kayenne GV K-Frame XP System Communications Overview
Kayenne Network Cabling
Network connections are required between the GV K-Frame XP Video Processor and the
PCU. The PCU routes network communications to and from the Control Panel Stripes and
Menu Panels, using custom multi-pin cables.
The use of two Ethernet cables to connect the PCU to the Video Processor is recommended.
CAUTION: The facility network used for your GV K-Frame XP system
(and other video production equipment) should be kept
separate from any external network, to prevent network
traffic from adversely affecting system operation.
To Next Page
Loading...
