GRASS VALLEY KAYENNE - IP I;O Configuration Menus

Installation & Service Manual
131
IP I/O Configuration Menus
IP/IO Config Menu
SFPs are configured in the Eng Setup, Video I/O, IP I/O Config menu.
Button descriptions are added to the Port Config SFPs Menu Buttons and Data Pads table.
.
Port Config SFPs Menu Buttons and Data Pads
Menu
Button/Label
Description
Port Config SFPs
SFP Speed
Select configured dual-use SFP speed of selected board:
10GbE or 25GbE
Streams/SFP
Select to choose input/output configuration buttons:
• 2 inputs/1 output,
• 4 inputs/2 outputs, or
• 8 inputs/4 outputs
System SFP
Displays the SFP selection/search result
SFP (label) Physical SFP, the “B” SFP is used for I/O Redundancy Mode
Local IP IP Address for the Frame to transmit/receive external
device data over the network
Subnet mask Facility Subnet Mask Address
Gateway Facility Gateway Address
The IP Config menu control is delegated with the following port type buttons:
• Inputs,
• Outputs, and