GRASS VALLEY KAYENNE - Karrera Panel Saver Time Adjustment; Kayenne and Karrera Touchscreen Calibration

Installation & Service Manual
295
Note: Pressing the Menu button cancels the Joystick calibration mode, but
may leave the Joystick in an un-calibrated state. Complete the entire
calibration procedure to ensure normal operation.
Karrera Panel Saver Time Adjustment
1 In any E-MEM area, press Menu, Page. This shows a list of menu items that are selected
with the buttons below the display (on the left).
Karrera Calibration Menu, E-MEM Area
2 Select Panel Saver (press Bank 3/7) to adjust the panel saver timing (on the right).
3 Once in panel saver mode, select the time period (in minutes) of inactivity required to
initiate the panel saver mode using the buttons below the display. The illuminated
button indicates the current setting.
Panel Saver Mode, E-MEM Area
Kayenne and Karrera Touchscreen Calibration
The Kayenne and Karrera Touch Screen Menu Panels are adjusted in the factory before
shipment, and so should not require calibration. If the Menu Panel does not respond
correctly to screen touches, however, you can perform this procedure.
1
Minimize or Exit the menu application.
2 With the Windows desktop visible, click on
Start/Programs/Hampshire TSHARC
Control Panel
. The Hampshire application will open.
8804_09
8804_08
Menu 1
Macro
Panel Stripe
Mem Delg
Trans
Rate
Menu 2
IP
Addr
Calib Time Date
Panel
Saver
Panel Saver
10 20 30 45 60