GRASS VALLEY KAYENNE - System Cabling for the GV Korona Control Panel; GV Korona Suites and Control Surfaces

System Cabling
96
System Cabling for the GV Korona Control Panel
The GV Korona GV K-Frame XP system uses Ethernet connections for communications. The
Video Processor has a built-in Ethernet switch. Tally outputs and GPI I/O (General Purpose
Interface Input/Output) control are also available on the Frame.
RS-422/485
GPI In/Out
Tally
USB
Keyboard, VGA
RS-232
Isolate Switcher System from External Network
GV Korona GV K-Frame XP System Communications Overview
GV Korona Suites and Control Surfaces
The GV K-Frame XP Control Panel system flexibility allows you to locate control surfaces in
physically separate locations. Two dedicated, customer supplied Ethernet switches may be
required when multiple suites are being used.
Internal Control
Laptop
Ethernet
VGA
Ethernet
Switch
Ehternet Switch
6600_06_r1
CAUTION: The facility network used for your GV K-Frame XP system
(and other video production equipment) should be kept
separate from any external network, to prevent network
traffic from adversely affecting system operation.