Maintenance
316
2-ME Karrera Control Panel Interior
2- ME Karrera Control Panel Interior
Torsion Bar
Lid Spring (2)
Air Guide Cover
Board Communications
RJ45, but not Ethernet
(8 of 10 used)
Board Power
(4 of 8 used)
USB (2)
Compact
Flash
Reset
Button
Power On/Off
Karrera 2-ME Panel Open, Air Guide In Place
Note: Pressing the Reset button performs a hard reset of the panel
processor. The preferred reset method is to use the E-MEM area, which
performs a controlled shut-down of the panel software and then reboots the
operating system. The Reset button should only be used if the panel is in a
state that does not allow an E-MEM area reset.
To Next Page
Loading...
