GRASS VALLEY KAYENNE - Panel Control Unit (PCU) Reset (Kayenne Only); Kayenne Control Panel Adjustments; Kayenne Lever Arm Calibration

288
Maintenance
Panel Control Unit (PCU) Reset (Kayenne only)
6- RU Video Processor Frame Reset Button and Power Switch
Panel Control Unit (PCU) Reset (Kayenne only)
The PCU has up to three reset buttons, one for the Control Panel Processor, one for the
standard Menu Panel, and one for the optional second Menu Panel. These controls are
accessible by opening the front door of the PCU Frame. Powering the unit off and back on
also resets all installed components (Panel and Menus).
Control Panel Processor
Reset Button
PCU Frame
Power Switch
Menu Panel
Reset Button
Second Menu Panel
Reset Button (option)
PCU Reset Buttons and Power Switch
Kayenne Control Panel Adjustments
Kayenne Lever Arm Calibration
Press the Exchange ME (the left-most graphic symbol button over the Lever Arm), Ptn
Limit, EMem Run
, and Trans Rate buttons simultaneously (in any order) to enter calibration
mode for that module. Follow the instructions displayed, moving the fader to the bottom
OFF
ON
8623266_66
Controller Board
Power Switch