Basic Configuration
248
Video Settings
Video Settings
The Video Settings menu reports the current system sync reference and status, allows
selection of the Frame Operating Mode, and provides other system functions.
Reference Sync Selection
Choosing Analog in the Eng Setup, Video Settings menu, selects the Analog Reference
connector on the Video Processor Frame for system reference. Any interruption of an
analog reference source can cause GV K-Frame XP system problems.
Frame Status – Reports the current sync status of the frame (for example, Locked).
Input Sync Rate – Reports the current input sync reference format.
About PTP Reference
GV K-Frame XP switchers connect to, and receive PTP reference from, the PTP Master server
on the network. The Grass Valley switcher PTP reference parameters can be configured in
To Next Page
Loading...
