Maintenance
340
Licensing Definitions
SNMP Licensed - SNMP is capable of running with all documented features available. See SNMP
enable/disabled for additional operational implications.
SNMP Unlicensed - SNMP runs minimal functionality provided by the operating system vendor
(VxWorks on K-Frames, Linux on K-Frame Control Panels) and is always enabled.
SNMP Enabled - (licensed only) all SNMP variable requests are processed and SNMP traps are sent.
SNMP Disabled - (licensed only) all SNMP variable requests are ignored and SNMP traps are not
sent.
SNMP Power Up License Processing
Frames and Control Panels power up with SNMP Unlicensed capabilities. If a SNMP license is
detected on the Frame then the Frame and Control Panel initialize SNMP licensed capabilities.
SNMP Licensed Configuration must be done to properly configure some of the licensed
capabilities.
SNMP Licensed Configuration
SNMP Licensed capabilities require additional configuration though the web interface as noted in
this document. The Video Processor Frame and Control Panel have separate web interfaces that
are accessed by specifying the correct IP address in the URL (example: http://192.168.1.170). An
example of the K-Frame Web page.
Configuration steps consist of:
• Enable/Disable SNMP
• Configure Trap Destination IP addresses
• Configure Community Name
Configuration of the NMS software itself will also be required to make full use of the SNMP feature.
To Next Page
Loading...
