Hakko Electronics V Series User Manual

2-4 2. Allen-Bradley PLC
SW3 (Network link communication speed)
Adjust to the settings of the network you are using.
SW4 (Reserved)
1770-KF2
SW1 (Protocol)
SW2, SW3, SW4 (Station number)
Set the station number of 1770-KF2. (This station should not be duplicated in the network.)
SW5 (Network link communication speed)
Adjust to the settings of the network you are using.
SW6 (Asynchronous link communication speed)
Adjust to the settings of the V7 series.
No Setting Contents
1ON
Data highway (57.6 kbps)
2ON
3ON
Link communication speed (19.2 kbps)4ON
5ON
6 ON Local/remote selection
No Setting Contents
1OFF
For extension, always OFF
2OFF
3OFF
4OFF
No Setting Contents
1 ON Protocol
2 OFF Protocol
3 ON Duplicated message unacceptable
4 OFF Handshaking signal ignored
5 OFF Protocol
Switch Setting
Contents
12
ON ON 57.6 kbps
No Setting Contents
1OFF
9600 bps2ON
3ON
4 ON Execution of diagnosis command

Hakko Electronics V Series Specifications

General

Brand	Hakko Electronics
Model	V Series
Category	Monitor
Language	English