Hakko Electronics V Series User Manual

9-2 9. GE Fanuc PLC
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
90 Series
90 Series SNP-X
Memory TYPE Remarks
R (data register) 0
I (input) 1
Q (output) 2
Memory TYPE Remarks
R (data register) 0
I (input) 1
Q (output) 2
M (internal relay) 3
G (global relay) 4
AI (analog input) 5
AQ (analog output) 6
T (temporary memory relay) 7
S (system status) 8 Read only
SA (system status) 9
SB (system status) 10
SC (system status) 11

Hakko Electronics V Series Specifications

General

Brand	Hakko Electronics
Model	V Series
Category	Monitor
Language	English