448 Programming: Multiple Axis Machining
12.1 Functions for Multiple Axis Machining
12.1 Functions for Multiple Axis
Machining
The TNC functions for multiple axis machining are described in this
chapter.
TNC function Description Page
PLANE Define machining in the tilted working plane Page 449
PLANE/M128 Inclined-tool machining Page 471
FUNCTION TCPM Define the behavior of the TNC when positioning the rotary axes (improvement of
M128)
Page 473
M116 Feed rate of rotary axes Page 478
M126 Shortest-path traverse of rotary axes Page 479
M94 Reduce display value of rotary axes Page 480
M114 Define the behavior of the TNC when positioning the rotary axes Page 481
M128 Define the behavior of the TNC when positioning the rotary axes Page 482
M134 Exact stop for positioning with rotary axes Page 485
M138 Selection of tilted axes Page 485
M144 Calculate machine kinematics Page 486
LN blocks Three-dimensional tool compensation Page 487
SPL blocks Spline interpolation Page 498
To Next Page
Loading...
Need help?
General
