666 Tables and Overviews
18.1 General User Parameters
Locking soft key for
tables
MP7224.2
Do not lock the EDITING ON/OFF soft key: %0000000
Lock the EDITING ON/OFF soft key for
îš„ Without function: Bit 0 = 1
îš„ Without function: Bit 1 = 1
îš„ Tool tables: Bit 2 = 1
îš„ Datum tables: Bit 3 = 1
îš„ Pallet tables: Bit 4 = 1
îš„ Without function: Bit 5 = 1
îš„ Point tables: Bit 6 = 1
Configure pallet files MP7226.0
Pallet table inactive: 0
Number of pallets per pallet table: 1 to 255
Configure datum files MP7226.1
Datum table inactive: 0
Number of datums per datum table: 1 to 255
Program length up to
which the LBL
numbers are checked
MP7229.0
Blocks 100 to 9999
Program length up to
which FK blocks are
checked
MP7229.1
Blocks 100 to 9999
Dialog language MP7230.0 to MP7230.3
English: 0
German: 1
Czech: 2
French: 3
Italian: 4
Spanish: 5
Portuguese: 6
Swedish: 7
Danish: 8
Finnish: 9
Dutch: 10
Polish: 11
Hungarian: 12
Reserved: 13
Russian (Cyrillic character set): 14 (only on the MC 422 B)
Chinese (simplified): 15 (only on the MC 422 B)
Chinese (traditional): 16 (only on the MC 422 B)
Slovenian: 17 (only as of MC 422 B, software option)
Norwegian: 18
(only as of MC 422 B, software option)
Slovak: 19 (only as of MC 422 B, software option)
Latvian: 20 (only as of MC 422 B, software option)
Korean: 21 (only as of MC 422 B, software option)
Estonian: 22 (only as of MC 422 B, software option)
Turkish: 23 (only as of MC 422 B, software option)
Romanian: 24 (only as of MC 422 B, software option)
Lithuanian: 25 (only as of MC 422 B, software option)
TNC displays, TNC editor
To Next Page
Loading...
Need help?
General
