ID2000 Series Industrial Code Reader User Manual
10
●
It is in green color lasting 0.5 s when the device reads codes
successfully, is solid green when the device reads codes
continuously, and is in red color when the device does not read
codes.
Note
The specific function of the status indicator may differ by device
models.
It is a power indicator. The indicator is red during the device’s
power-on process. After the device is powered on, the indicator is
green.
It is the LED light source used to provide light when the device
acquires images.
Note
The light source color is different by device models.
It is used to acquire images.
It helps to indicate the field of view and aim targets.
It is used to install the lens.
The buzzer beeps three times when the device is powered on,
beeps twice when the device reads setting codes successfully, and
beeps once when the device reads codes successfully.
Note
Only type VI and type VII devices have a buzzer.
To Next Page
Loading...
