ID2000 Series Industrial Code Reader User Manual
54
Table 9-5 Parameters of Multiple Mode Polling
It sets the exposure time of polling.
It sets the polling Gamma value.
●
If the value is between 0 and 1, when the image brightness increases,
dark area becomes brighter.
●
If the value is between 1 and 4, when the image brightness decreases,
dark area becomes darker.
After enabling this parameter, you can set polling focus position.
It sets the polling focus position.
Polling Lighting Selector
It selects lamps on different directions, including up/down and mid.
After enabling this parameter, the light source will turn on.
6. Repeat step 4 and step 5 to set other parameters from Polling Param.
7. (Optional) View Polling Status and Best Polling Group Idx.
●
Polling Status: It displays the current polling status. 0 stands for polling ended, and 1
stands for polling started.
●
Best Polling Group Idx: It is used to display the polling parameter number when the device
recognizes codes after enabling polling. If the polling is disabled or polling parameters
are edited, it displays 1 by default.
Figure 9-5 Multiple Mode
To Next Page
Loading...
