ID2000 Series Industrial Code Reader User Manual
61
Figure 9-13 ROI Focus
2. Click in the live view window, and click it again to stop acquisition and make sure
there is image in the window.
3. Click Draw in Draw Focus ROI, and draw ROI by dragging the mouse in live view window.
Figure 9-14 Draw Focus ROI
4. (Optional) Set following parameters to adjust ROI size and position.
●
AF Offsex X: It is X coordinate of the upper left corner in ROI where executes auto focus.
●
AF Offsex Y: It is Y coordinate of the upper left corner in ROI where executes auto focus.
●
AF Width ROI: It refers to the width in ROI where executes auto focus.
●
AF Height ROI: It refers to the height in ROI where executes auto focus.
5. (Optional) Click Execute in Max. Focus ROI to have a global focus.
6. (Optional) Repeat step 3 if you want to set multiple ROIs.
To Next Page
Loading...
