HikRobot ID2000 Series - Page 88

ID2000 Series Industrial Code Reader User Manual
79
● Regarding other device types, the device with USB data interface supports stopping
trigger via USB only, and the device with fast Ethernet supports all stop trigger methods
apart from USB method.
● For specific stop trigger methods, refer to the actual device you got.
Stop Trigger via TCP
When the TCP server receives the specified string text, the trigger will be stopped.
Steps
1. Go to I/O Control Settings → Stop Trigger.
2. Enable TCP Stop Trigger Enable.
3. Set following parameters according to actual demands.
● TCP Trigger Port: It is 2001 by default.
● TCP Stop Trigger Format: It is Str by default.
● TCP Stop Trigger Text: It sets the stop trigger text, and it is Stop by default.
Stop Trigger via UDP
When the UDP receives the specified string text, the trigger will be stopped.
Steps
1. Go to I/O Control Settings → Stop Trigger.
2. Enable UDP Stop Trigger Enable.
3. Set following parameters according to actual demands.
● UDP Trigger Port: It is 2002 by default.
● UDP Stop Trigger Format: It is Str by default.
● UDP Stop Trigger Text: It sets the stop trigger text, and it is Stop by default.
Stop Trigger via IO
Stopping trigger via IO allows you to select hardware or software trigger source to stop the
device from acquiring images.
Steps
1. Go to I/O Control Settings → Stop Trigger.
2. Enable IO Stop Trigger Enable.
3. Select sources from LineIn 0/1/2/3 and Software Trigger End as IO Stop Trigger Selector.
4. (Optional) Set trigger activation if LineIn 0/1/2/3 is selected as IO Stop Trigger Selector.
5. (Optional) Click Execute in Software Stop Trigger to stop trigger if Software Trigger End
is selected as IO Stop Trigger Selector.