To Next Page

To Previous Page

Figure 11-6 Port Sengs

2. congure port sengs as needed.

Alarm Host IP/Port

With a remote alarm host congured, the device will send the alarm event or excepon

message to the host when an alarm is triggered. The remote alarm host must have the client

management system (CMS) soware installed.The alarm host IP refers to the IP address of

the remote PC on which the CMS

soware (e.g., iVMS-4200) is installed, and the alarm host

port (7200 by default) must be the same as the alarm monitoring port congured in the

soware.

Server Port

Server port (8000 by default) should be congured for remote client soware access and its

valid range is 2000 to 65535.

HTTP Port

HTTP port (80 by default) should be congured for remote Web browser access.

Mulcast IP

Mulcast can be congured to enable Live View for cameras that exceed the maximum

number allowed through network. A

mulcast IP address covers Class-D IP ranging from

224.0.0.0 to 239.255.255.255 and it is recommended to use an IP address ranging from

239.252.0.0 to 239.255.255.255. When adding a device to the CMS soware, the mulcast

address must be the same as that of the device.

RTSP Port

Network Video Recorder User Manual

129

HIKVISION DeepinMind Series User Manual

Questions and Answers: