4.30 Central Braking System—P3700A Model Only
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 76 Affinity® Three Birthing Bed and Affinity® Four Birthing Bed
Service Manual (MAN272 REV 4)
Replacement
1. To install the replacement central braking system mechanism, reverse the
removal procedure with attention to the following:
a. Ensure that the brake/steer strip (straight metal strap) and the brake
strip (bent metal strap) are correctly assembled on their respective
sides.
b. Ensure that each brake strip (I) is correctly attached to its cam
pivot (W).
c. Complete sections “Brake and Steer Caster Adjustment” on page 4-81
and “Brake Caster Adjustment” on page 4-82.
2. Ensure that all brake and steer functions work properly.
3. Do the “Function Checks” on page 2-4.
To Next Page
Loading...
