Hill-Rom Affinity Three - Page 21

Safety Tips
Chapter 1: Introduction
Affinity® Three Birthing Bed and Affinity® Four Birthing Bed Page 1 - 11
Service Manual (MAN272 REV 4)
1
CAUTION:
For shipping and storage, place the removed P.C. board in an antistatic
protective bag. Failure to do so could result in equipment damage.
CAUTION:
Support the siderail during the removal procedure. Failure to do so
could result in equipment damage.
CAUTION:
Ensure that the siderail does not drop when the pins are removed.
Failure to do so could result in damage to the wiring going to the
siderail.
CAUTION:
Do not use harsh cleansers or detergents such as scouring pads and
heavy-duty grease removers, or solvents such as toluene, xylene, and
acetone. Equipment damage could occur.
CAUTION:
Ensure that the metal platform is dry before placing the mattress back
onto the bed. Failure to do so could result in equipment damage.
CAUTION:
Mattress damage caused by improper draping and/or cleaning
procedures is not covered by warranty.
CAUTION:
Standard OB packs and paper drapes will not keep the sheets dry.
CAUTION:
When handling electronic components, wear an antistatic strap. Failure
to do so could result in component damage.
CAUTION:
Do not use silicone-based lubricants. Equipment damage could occur.