3.7 Using D/A Output
97
Maximum Current Ratio
Frequency
STD.2 (2 Vf.s.) settings STD.5 (5 Vf.s.) settings
Although the maximum current ratio is displayed up to 6.12 M, level output changes to +9 V at 45 when using
the STD.2 (2 V) setting and 18 when using the STD.5 (5 V) setting, voltages in excess of that value are not
output.
Fixed to STD.5 (5 Vf.s.)
f.s.: 0.5/ 5/ 50/ 500/ 5 k/ 50 k/ 500 k [Hz]
Frequency level output (fixed to STD.5) changes to +5 V at the selected f.s. value and +9 V at the frequency
that is 1.8 times the f.s. value, voltages in excess of that value are not output. (The default f.s. setting is 500
Hz.)
To Next Page
Loading...
