96
Changing Panel Name
7.3 Changing Panel Name
This section describes the procedure for changing the panel name.
Procedure to display the setting screen: LOAD/SAVE key
1
Select the number of the panel whose name you want to change, and press the F2 key
[RENAME].
2
Change the panel name.
F1 key [0-9] Numeric input mode is enabled. (Select a numerical value using the cursor.)
F2 key [A-Z] Alphabetical character input mode is enabled. Underscore (_) can also be entered.
(Select a character using the cursor.)
F4 key [DEL] Deletes the characters one by one.
To cancel the change operation, press the ESC key.
3
Press the ENTER key.
The panel name is settled.
To Next Page
Loading...
