Hioki Super megohm SM7110 - Setting Voltage Value for Resistance Calculation

50
Reducing Variation in Measured Values (Average Function)
4.2 Reducing Variation in Measured Values (Average
Function)
The average for the set number of measured values will be displayed as the result. This function
can reduce the variation in the measured values. Set it on the Measurement screen.
1
Press the F4 key [MODIFY] to enable the measurement conditions to be changed.
Pressing the ESC key cancels the changes of the measurement conditions.
2
Select whether to perform the average process or not.
[AUTO] If measured value uctuates signicantly, the instrument discards the internal average
value and calculates another average value. Set [AVG] to [HOLD], and then set the
average frequency.
[HOLD] Moving average (However, arithmetic averages are calculated with the trigger source
setting set to the external trigger and the sequence measurement set to o󰀨.)
[OFF] Does not perform the average process (default setting).