26
Basic Key Operation
1.5 Basic Key Operation
Displaying measurement screen
You can also press the ESC key to return to the measurement screen.
Displaying the various menu settings screens
This section shows an example of switching the measurement screen to the [SYS] screen.
1
2
Select
(left or right)
In this manual, the procedure to display the settings screen is described as follows:
Procedure to display the settings screen: (Measurement screen) MENU key >
[SYS] tab
(That is to say, to display the settings screen, on the measurement screen, press the MENU key,
and then press the keys
and to select the [SYS] tab.)
To Next Page
Loading...
