30
Connecting Measurement Leads to Instrument
2.2 Connecting Measurement Leads to Instrument
Be sure to read “Before connecting the measurement leads and electrode to the instrument”
(p. 11) beforehand.
The measurement leads are optional. (p. 3)
Required leads: Measurement lead (red) and measurement lead (black) ×1 each
Red
INPUT terminal
OUTPUT terminal*
Black
* Connect the black lead to the GROUND
terminal if both the GROUND and OUTPUT
terminals are grounded.
How to connect measurement lead (red) to the instrument
1
Attach the connector to
the INPUT terminal.
2
Tighten the screw by
turning it clockwise.
INPUT terminal
2.3 Connecting Electrode
Be sure to read “Before connecting the measurement leads and electrode to the instrument”
(p. 11) beforehand.
Electrodes are optional. (p. 4)
To connect a electrode to the instrument, refer to the Instruction Manual that comes with each of
the electrode.
To Next Page
Loading...
