Hioki Super megohm SM7110 - Checking Voltage Error (Voltage Monitor Check Function)

97
Deleting Panel Contents
7.4 Deleting Panel Contents
This section describes the procedure for deleting saved settings.
Procedure to display the setting screen: LOAD/SAVE key
1
Select the panel number to be deleted, and press the F3 key [CLEAR].
The conrmation dialog box is displayed.
To cancel the delete operation, press the F4 key [CANCEL] or the ESC key.
2
Press the F2 key [OK] or the ENTER key.
The contents of the panel is deleted.
7
Saving and Loading Settings (Panel Saving and Loading)