Hioki Super megohm SM7110 - Browsing, Deleting, and Outputting Internal Memory Data

101
Browsing, Deleting, and Outputting Internal Memory Data
Inputting the KEYLOCK signal disables all the key operation. (The key lock function cannot be deactivated
by using any operation keys.)
No key operation is enabled while the KEYLOCK signal state is on.
When the signal switches to the o󰀨 state, the key lock function is deactivated.
8.3 Browsing, Deleting, and Outputting Internal
Memory Data
The memory function can automatically store up to 999 measured values in the internal memory
of the instrument. The number of stored measured values reaching 999 disables further measured
values to be stored.
You can browse the list of saved measured values, delete them, or acquire them by sending the
communication command (
:MEMory?
).
Procedure to display the setting screen: (Measurement screen) MENU key >
[SYS] tab
Select whether to activate the memory function or not.
[ON] Activate the memory function.
[OFF] Deactivate the memory function. (default setting)
8
System Setting