93
7
Saving and Loading Settings
(Panel Saving and Loading)
The present settings can be saved to the memory of the instrument (panel saving function).
The saved settings can be loaded from the memory by pressing the keys or sending communication
commands (panel loading function).
The instrument can save a maximum of 50 settings. The saved settings are retained even when the
instrument is turned o.
Setting items that can be saved with the panel saving
Basic settings
• Measured value display mode
• Applied voltage for measurement
• Measurement speed
• Current range
• Delay
• Average
• Sequence program
[MEAS] settings
• Display range
• Displayed digit number
• Function of updating and switching
drawing during measurement
• Voltage value for resistance
calculation
• Trigger
• Self-calibration
• Interlock
• Current limiter
[C.CHK] settings
• Fixture capacitance open correction
• Contact check
[COMP] settings
• Upper and lower limit values of
comparator
• Judgment sound
[ELEC] settings
• Resistivity measurement settings
7 Saving and Loading Settings (Panel Saving and Loading)
7
Saving and Loading Settings (Panel Saving and Loading)
To Next Page
Loading...
