Hioki Super megohm SM7110 - Connecting Measurement Leads or Electrode to Object to Be Measured

39
3
Basic Measurement
3.1 Setting Measured Value Display Mode
Press the MODE key to switch the measured value display modes.
Resistance value measurement mode (initial screen) Current value measurement mode
Surface resistivity measurement mode
Liquid volume resistivity measurement mode
Volume resistivity measurement mode
Measurement conditions must be set to measure surface resistivity and volume resistivity.
See “4.13 Setting Resistivity Calculation (Resistivity Measurement Function)” (p. 73).
3 Basic Measurement
3
Basic Measurement