106
Initializing Settings (Reset)
8.9 Initializing Settings (Reset)
The reset function has 2 methods.
For details of items that are to be reset, see “Default setting list” (p. 107).
Procedure to display the setting screen: (Measurement screen) MENU key >
[SYS] tab
1
Select the reset method.
[NORMAL] Resets the settings to the factory default excluding the panel data (The communication
settings are not reset).
[SYSTEM] Resets all the settings to the factory default including the panel data (The communication
settings are not reset).
The conrmation dialog box is displayed.
To cancel the reset operation, press the F4 key [CANCEL] or the ESC key.
2
Press the F2 key [OK].
The reset operation is executed.
To reset all of the settings including those of the panel data and the communications to the factory default,
turn o the instrument, and then turn it on while holding down both the MENU key and the LOAD/SAVE key.
To Next Page
Loading...
