Hioki Super megohm SM7110 - Initializing Settings (Reset)

100
Disabling Key Operation (Key Lock Function)
8.2 Disabling Key Operation (Key Lock Function)
You can disable the key operation.
Procedure to display the setting screen: (Measurement screen) MENU key >
[SYS] tab
1
Press [ALL] or [MENU] to disable the key operation (to activate the key lock function).
[ALL]
Disables any key operation except [UNLOCK] among the
MENU key
s or the STOP
key.
[MENU] Disables the following key operation:
COMP, LOAD/SAVE, and MENU
The conrmation dialog box is displayed.
To cancel the key lock function to be activated, press the F4 key [CANCEL] or the ESC key.
2
Press the F2 key [OK].
[K.LOCK] is displayed on the measurement screen, and the key operation is disabled.
To deactivate the key lock function, hold down the F4 key [UNLOCK] for 1 second or more.