134
GP-IB Interface
10.4 GP-IB Interface
Connecting the GP-IB cable
Be sure to read “Before connecting the communication cable to the instrument” (p. 14)
beforehand.
Connect the GP-IB cable to the GP-IB Connector. After connecting the cable to the instrument and
another device, be sure to fasten the screws.
Recommended cable: Model 9151-02 GP-IB Connector Cable (2 m)
Rear
Setting the instrument
Procedure to display the setting screen: MENU key > [IF] tab
1
Press the F2 key [GPIB].
2
Set the device address.
0 to 30 (default setting: 1)
Press the F3 key [↓] or F4 key [↑] to select a value.
To Next Page
Loading...
