131
USB Interface
Setting the instrument
Procedure to display the setting screen: MENU key > [IF] tab
1
Press the F3 key [USB].
2
Set the USB mode.
[KEYBOARD] Outputs measured values through the USB cable connected to the computer.
Measured values are output to a text editor or spreadsheet in the same way
as data is entered with a keyboard.
For the external trigger setting:
The measurement value is output when the TRIG signal is input or the
ENTER key is pressed.
For the internal trigger setting
The updated measured value is automatically output on completion of
each measurement.
[COMM] Controls the instrument with commands through the USB cable connected to
the computer (default setting).
10
Communications (USB, RS-232C, GP-IB)
To Next Page
Loading...
