107
Initializing Settings (Reset)
Default setting list
Setting Screen display Default setting
Reference
Measurement
screen
Voltage output function MES.V 0.1 V (D) p. 41
Measurement speed SPEED SLOW2 p. 43
Range RANGE AUTO p. 44
Delay function DELAY 0.0 ms p. 49
Average function AVG OFF p. 50
Sequence program
function
Setting SEQ OFF
p. 52
Discharge 1 DCHG1 0.0 s
Charge CHARG 0.0 s
Measurement MEAS 0.1 s
Discharge 2 DCHG2 0.0 s
Measured value display mode –
Resistance value
display
p. 39
MEAS
Measured value display
Mode MEAS FORMAT EXP (exponent display) p. 40
Displayed digit DIGIT 6 digits p. 40
Updating Drawing During Measurement DISP UPDATE ON p. 76
Voltage value for
resistance calculation
Setting V MODE MES.V
p. 56
Voltage set value SET 0.1 V
Trigger mode TRIGGER
INTERNAL
(internal trigger)
p. 58
Self-calibration
Setting SELF CALIBRATION ON
p. 60
Setting time – 600 s
Interlock INTERLOCK OFF p. 62
Current limiter
Charge-system
current limit
CHARGE OFF p. 64
Total current limit CURRENT LIMIT
5 mA (measurement
system: 5 mA, charge
system: 0 mA)
p. 65
C.CHK
Contact check setting
Frequency FREQ 300 kHz
p. 67
Work
capacitance
WORK.C NORMAL
Cable length CABLE 1.0 m
Contact check
Setting CONTACT CHECK OFF
p. 71
Judgment
reference value
LIMIT 0.00 pF
COMP
Comparator function
(for each measurement
mode)
Upper limit value UPPER LIMIT OFF
p. 89
Lower limit value LOWER LIMIT OFF
Judgment sound (Hi,
IN, Lo)
Judgment sound COMP BEEP OFF
p. 91
Number of
ringing times for
judgment
– 1
ELEC
Diameter of the main electrode D1 50.0 mm
p. 73
Internal diameter of the counter electrode D2 70.0 mm
Thickness of sample t 0.1 mm
Electrode constant K 500.00
8
System Setting
To Next Page
Loading...
