Hioki Super megohm SM7110 - Adjusting Backlight Brightness; Changing Power Frequency Setting (Power Frequency Setting Function)

105
Adjusting Backlight Brightness
8.7 Adjusting Backlight Brightness
The brightness of the backlight can be adjusted for the illumination of the installation location.
Procedure to display the setting screen: (Measurement screen) MENU key >
[SYS] tab
0% to 100%, in increments of 5% (default setting: 80%)
Press the F3 key [↓] or F4 key [↑] to change the value.
8.8 Changing Power Frequency Setting (Power
Frequency Setting Function)
You can change the setting for the power frequency. This enables stable measurement without
being a󰀨ected by the power frequency.
Procedure to display the setting screen: MENU key >
[SYS] tab
[AUTO] Automatically detects either 50 Hz or 60 Hz (default setting).
[50Hz] 50 Hz
[60Hz] 60 Hz
8
System Setting