Hioki Super megohm SM7110 - Starting;Stopping Measurement; Confirming Measurement Results

40
Setting Measured Value Display Mode
Changing display notation
Procedure to display the settings screen: (Measurement screen) MENU key > [MEAS] tab
[EXP] Exponential notation: Displays values, expressed in exponential notation, to ve decimal
places. (Example: 1.00000E+16
Ω
) (default setting)
[UNIT] Decimal notation: Displays values, expressed in decimal notation, that have six
signicant gures. (Example: 10.0000 P
Ω
)
Changing displayed digits
Procedure to display the settings screen: (Measurement screen) MENU key > [MEAS] tab
Press the [F1], [F2], [F3], or [F4] key to change the number of the displayed digits.
3 digits to 6 digits (Default setting: 6 digits)