44
Changing Current Range
3.4 Changing Current Range
Change the current range if the measured current value or the measured resistance value exceeds
the measurable range or if measurement with another measurement accuracy is preferred.
See “Current measurement accuracy” (p. 141).
No setting for resistance range is required (If the current range is set to [AUTO], the resistance
range will be automatically selected).
Some ranges are not available depending on the measurement speed setting. If the current range
cannot be changed, check the measurement speed.
See “Available setting depending on current ranges and measurement speed” (p. 43).
Press the RANGE▲ key or the RANGE▼ key on the measurement screen.
Pressing the F4 key [MODIFY] enables also the function keys to be used to select the current
range.
20 pA, 200 pA, 2 nA, 20 nA, 200 nA, 2 uA, 20 uA, 200 uA, 2 mA, AUTO (Default setting: AUTO)
Pressing the F1 key [AUTO] sets the range to AUTO immediately.
Pressing the F2 key [HOLD] xes the current range on the presently selected range.
Pressing the F3 key [↓] switches the current range to the next upper range.
Pressing the F4 key [↑] switches the current range to the next lower range.
To Next Page
Loading...
