Hioki Super megohm SM7110 - Setting Measurement Speed

37
Inspection Before Use
2.10 Inspection Before Use
Before using the instrument, verify that it operates normally to ensure that no damage occurred
during storage or shipping. If you nd any damage, contact your authorized Hioki distributor or
reseller.
Verifying the instrument and the peripheral devices
Inspection items Solution
Is the power cord insulation torn, or is any
metal exposed?
Do not use the instrument if damage is found, as an electric
shock or short-circuit accidents could result.
Contact your authorized Hioki distributor or reseller.
Is the insulation of the connected lead or
the connection cords torn, or is any metal
exposed?
If any damage is found, it may cause an electrical shock. If
this happens, replace the measurement probe or connection
cords with ones specied by Hioki.
Is the instrument damaged?
Verifying the instrument on start-up
Inspection items Solution
Does the fan rotate when the instrument is
turned on? Are “Model name” and “Version
number” displayed on the screen?
If the fan does not rotate, or if “Model name” and “Version
number” are not displayed, the instrument may be
malfunctioning. Request repairs.
Version number
Model name
Is the measurement screen displayed after
the self-test?
If the screen does not display anything, the instrument may
be malfunctioning internally. Request repairs.
2
Preparing for Measurement