58
Changing Measurement Starting Conditions (Trigger Function)
4.5 Changing Measurement Starting Conditions
(Trigger Function)
The following two methods are available to set the measurement starting conditions.
External trigger After the START key is pressed, when the external trigger signal is input, a
measurement starts.
Internal trigger When the START key is pressed, the internal triggers are generated automatically and
measurements are repeatedly performed.
WARNING
When the START key is pressed, a hazardous voltage is generated at the
measurement terminal. To avoid an electric shock, do not touch the tip of the
measurement lead.
Setting the trigger mode
Procedure to display the settings screen: (Measurement screen) MENU key > [MEAS] tab
[EXTERNAL] External trigger
[INTERNAL] Internal trigger (default setting)
To Next Page
Loading...
