Hioki Super megohm SM7110 - Summary and Features of Interface

129
10
Communications (USB, RS-232C,
GP-IB)
10.1 Summary and Features of Interface
The instrument can be controlled and data can be acquired through communication commands by
using the communication interface.
Multiple interfaces cannot be used simultaneously on the instrument.
The interface set on the [IF] screen is enabled.
For details about the communication commands, refer to Communication Command Instruction
Manual included in the accompanying CD.
They can also be downloaded from the Hioki website.
For the specications, see “11.4 Interface Specications” (p. 152).
10 Communications (USB, RS-232C, GP-IB)
10
Communications (USB, RS-232C, GP-IB)